OpenBuildings™ Designer Help

To Punch a Hole on Single-Layer Compound Slab

  1. Select Punch Hole option from the Place Slab split icon.

    The Placement Tab opens that contains different Punch Hole Options.

  2. Click Delete Hole Profile to delete the Hole Profile on compound slab.
  3. From Punch Mode option menu, specify one of the following options and perform the subsequent steps:

    Select the Hole Profile option from the drop-down list.

    • Set the Depth by entering a numeric value.
      Note: Depth will be enabled after selecting the Hole Profile option.

    or

    Select the Dynamic option and adjust the hole depth as needed.

    or

    Select the Punch Through option to get a hole punched through the compound slab layer.

  4. Select the placed shape on compound slab.
  5. Select the compound slab.
  6. Left mouse-click to Accept the changes.

    A hole is punched through the compound slab.

  7. (Optional) Hold <Ctrl> and select to add additional punching shapes.

Left: Punch Mode = Hole Profile, Depth = 3, Right: Punch Mode = Dynamic

Parent topic: Punch Hole